Path: utzoo!attcan!uunet!mcsun!ukc!axion!tharr!chris
From: chris@tharr.UUCP (Chris Allen)
Newsgroups: comp.sys.atari.st
Subject: Re: Nec 3D and St
Message-ID: <1051@tharr.UUCP>
Date: 29 Sep 90 10:47:54 GMT
References: <2013@jpusa1.UUCP>
Reply-To: chris@tharr.UUCP (Chris Allen)
Organization: Power Microsystems Ltd
Lines: 12

In article <2013@jpusa1.UUCP> rick@jpusa1.chi.il.us (Rick Mills) writes:
>	Has anyone used a Nec 3D with an Omniswitch on
>an St or Mega?  I haven't had any luck with cables, and

The 3D works fine with a switched cable as long as it is well grounded 
and shielded. You need a four-pole double-throw switch though.

-- 
         chris@tharr.uucp  ..!ukc!axion!tharr!chris 
  Disclaimer: The views expressed above are those of my employer..   

  <-- tharr free public access to Usenet in the UK 0234 261804 -->