Path: utzoo!attcan!uunet!comp.vuw.ac.nz!am.dsir.govt.nz!dsiramd!marcamd!mercury!kcbbs!dgd
From: STT@kcbbs.gen.nz (Jon Clarke)
Newsgroups: comp.sys.atari.st
Subject: Adding to Megafile 30
Message-ID: <1990Oct3.001547.20844@kcbbs.gen.nz>
Date: 3 Oct 90 00:15:47 GMT
Sender: dgd@kcbbs.gen.nz (David Dix @ Kappa Crucis BBS, Auckland, NZ)
Lines: 27
Organisation: STaTus BBS. The Atari BBS in Auckland, New Zealand.

Lines: 26

Re adding a second drive to the Megafile 30.
   -----------------------------------------
[1] The controller card you have in there is an ABC4070 (adaptic)
[2] You will have to select LDN 0 and SCSI 1 as the other will be 0
    The dip swichs sit looking from the front of the megafile, next
    to the power supply directly behind the 20way read/write lines.
[3] You will have to insert/soilder in another 20way read/write plug.
[4] You may have to get a slightly better power supply as the one I have
    in mine is only a 40watt supply.
 
This is a brief overview and I hope it helps you with your project. I
think you will like alot of others out here find it easier to get a 40 meg
drive and place it in there and run it in rll and get 60 megs. Sure saves
alot of the hassells.

 Jon Clarke 

  +---------------+-----------------+---------------------------------+
  |  o( )  STaTus | The Atari BBS   | Snail mail to : Jon Clarke,     |
  | /  /\   BBS.  | in Auckland,NZ  +------------+    RD#2 Drury,     |
  +---------------+-----------------+ Running::  |    Auckland,       |
  |Mail : STT@kcbbs.gen.nz          | MBBS Ver 3 |    New Zealand.    |
  |     : J.Clarke6  - GEnie        +------------+--------------------+
  |     : 72000,3555 - CIS          | Node 1&2 :+64-9-606067 / 608485 |
  +---------------------------------+---------------------------------+