Path: utzoo!utgpu!watserv1!watmath!att!cbnewsl!hojo From: hojo@cbnewsl.att.com (HC Johnson) Newsgroups: comp.sys.atari.st.tech Subject: Re: Help with ICD Advantage-rtc Summary: maybe its in the minix addon already Message-ID: <1990Sep28.200801.10687@cbnewsl.att.com> Date: 28 Sep 90 20:08:01 GMT References: Organization: AT&T Bell Laboratories Lines: 17 In article , killer@niksula.hut.fi (Kalle Kivimaa) writes: > > The subject says it all. I would like to know how to read Advantage's > real time clock from Minix (ST). How can it be done? The upgrade for MINIX 1.5.10 includes the code I originally added to read the several different clocks found on HD interfaces. All are the same clock chip, just at different SCSI addresses and read funnies. Supported are/were: BMS-100; BMS-200 Supra and ICD. Unless ICD changed it it should be there. What I did was disassemble there clock read program (the one that sets the Atari clock) and then stick in a .s program that actually reads the clock into the MINIX kernel. Howard Johnson ATT BELL LABS att!lzsc!hcj hcj@lzsc.att.com