Path: utzoo!attcan!uunet!samsung!dali.cs.montana.edu!uakari.primate.wisc.edu!zaphod.mps.ohio-state.edu!sdd.hp.com!hplabs!otter.hpl.hp.com!hpltoad!ghiggins!gjh From: gjh@hplb.hpl.hp.com (Graham Higgins) Newsgroups: comp.sys.atari.st.tech Subject: Re: What do the Bombs mean? Message-ID: Date: 4 Oct 90 09:07:51 GMT References: <`$R%X?_@rpi.edu> Sender: news@hplb.hpl.hp.com (Usenet News Administrator) Organization: Hewlett-Packard Laboratories, Bristol, UK. Lines: 74 In-Reply-To: onders@degas.ipl.rpi.edu's message of 3 Oct 90 18:46:21 GMT Nntp-Posting-Host: ghiggins.hpl.hp.com Tim Onders writes: ++ In particular, what do 3 bombs mean? Does anyone have a list of the ++ different bombs? I used to have one but I can not find it now. 3 bombs = Address Error. I s'pose it's time for this to appear again .... Error description GEM Error code ========================================= OK (no error)....................0 Fundamental error................1 Drive not ready..................2 Unknown command..................3 CRC error........................4 Bad request......................5 Seek error.......................6 Unknown media....................7 Sector not found.................8 No paper.........................9 Write fault.....................10 Read fault......................11 General error...................12 Write protect...................13 Media change....................14 Unknown device..................15 Bad sectors on format...........16 Insert other disk...............17 Invalid function number.........32 File not found..................33 Path not found..................34 No handles left.................35 Access denied...................36 Invalid handle..................37 Insufficient memory.............39 Invalid memory block address....40 Invalid drive specified.........46 No more files...................49 Range error.....................64 Internal error..................65 Invalid program load format.....66 Description 68000 chip # of bombs =========================================== Reset: Initial PC2...............1 Bus Error........................2 Address Error....................3 Illegal Instruction..............4 Zero Divide......................5 CHK Instruction..................6 TRAPV Instruction................7 Privilege Violation..............8 Trace............................9 Line 1010 Emulator..............10 Line 1111 Emulator..............11 [unassigned, reserved]..........12 [unassigned, reserved]..........13 Format Error....................14 Uninitialized Interrupt Vector..15 [unassigned, reserved].......16-23 Spurious Interrupt..............24 Level 1 Interrupt Autovector....25 Level 2 Interrupt Autovector....26 Level 3 Interrupt Autovector....27 Level 4 Interrupt Autovector....28 Level 5 Interrupt Autovector....29 Level 6 Interrupt Autovector....30 Level 7 Interrupt Autovector....31 Trap Instruction Vectors.....32-47 [unassigned, reserved].......48-63 User Interrupt Vectors......64-255