Xref: utzoo comp.sys.mac.comm:1122 comp.sys.mac.hardware:5593
Path: utzoo!attcan!uunet!mailrus!cs.utexas.edu!know!zaphod.mps.ohio-state.edu!usc!apple!voder!pyramid!leadsv!selby
From: selby@leadsv.UUCP (Paul Selby)
Newsgroups: comp.sys.mac.comm,comp.sys.mac.hardware
Subject: Problems With Kinetics/Cisco Combination
Keywords: kinetics,fastpath,cisco
Message-ID: <13183@leadsv.UUCP>
Date: 28 Sep 90 23:21:58 GMT
Followup-To: poster
Organization: LOCKHEED, Sunnyvale, CA
Lines: 13

We have a KFP4 attached to a Cisco Router to act as a router between our net
and the rest of the campus.  The current version of KSTAR is 8.01 using option
flags 17 and 18 set.  The Cisco router has version 8.1(14) firmware installed.
The Cisco also has "no ip-route cache" and "no appletalk checksum" as part of
the configuration.  The problem we are experiencing is that resources that
are part of a zone tend to appear and then disappear (appleshare fileservers,
netway 1000 servers, laserwriters, etc).  Has anyone seen this before?  If so,
are there any solutions that can solve the problem?

We also have set up a second KFP4 that completely bypasses the Cisco router
and as such, it works fine.

Thanks in advance.