Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!mailrus!uwm.edu!cs.utexas.edu!tut.cis.ohio-state.edu!dinghy.cis.ohio-state.edu!jxr
From: jxr@dinghy.cis.ohio-state.edu (J Ramanujam)
Newsgroups: comp.terminals
Subject: Help with setting stop bits in heath-19 (h19)
Keywords: h19, stop bit
Message-ID: <84209@tut.cis.ohio-state.edu>
Date: 29 Sep 90 19:20:59 GMT
Sender: news@tut.cis.ohio-state.edu
Reply-To: <jxr@dinghy.cis.ohio-state.edu>
Organization: Ohio State University Computer and Information Science
Lines: 14

I need some help in seeting the number of stop bits on
a Heathkit-19 (h19) terminal - the "format" used here
is 8 nits, NO parity bit and 1 stop bit - I am able to
set 8 nits with no parity bit but not the stop bit.

Using the commands on the modem, I can figure out that
it is indeed 8 bits with no parity but I am unable to
figure out the number of stop bits. As it stands, I am
not able to connect to the system (all I get is NO CARRIER)
I would like to know how to set/determine the number
of stop bits. 

Thank you very much.
- Ramanujam