Xref: utzoo comp.unix.questions:25831 comp.unix.sysv386:809 Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!midway!mimsy!nmrdc1!rdc30med From: rdc30med@nmrdc1.nmrdc.nnmc.navy.mil (LCDR Michael E. Dobson) Newsgroups: comp.unix.questions,comp.unix.sysv386 Subject: Re: Reliability of (Sys V) file systems on power failure Summary: Showdown (tm) automatic power failure system shutdown product Message-ID: <1990Sep28.195746.19612@nmrdc1.nmrdc.nnmc.navy.mil> Date: 28 Sep 90 19:57:46 GMT References: <1990Sep24.231148.18053@ico.isc.com> <1990Sep26.153108.550@naitc.naitc.com> <1990Sep27.132549.10168@nmrdc1.nmrdc.nnmc.navy.mil> Organization: Naval Medical Research & Development Command Lines: 32 In article <1990Sep27.132549.10168@nmrdc1.nmrdc.nnmc.navy.mil> I wrote: > [ ..... ] Because of this, in addition to an UPS, I >have installed a powerfailure monitor which automaticly begins the shutdown >sequence when it senses a powerfailure from the primary power source. The >UPS provides time for users to log off and for the shutdown sequnce to >complete. For a cost of ~$250 for the transducer/software, it's a very good >investment. E-mail if you want details on the product. Because of several requests, I am posting the following: The system I mentioned is called Showdown and is distributed by: Continental Information Systems Corporation PO Box 248 Itasca, IL 60143-0248 (312) 250-8111 It is available for a variety of platforms, I don't recall the complete list right off and can't find the product brochure. It consists of a transducer that plugs into the wall and a serial port on the computer and has software to monitor that port. When a power failure is sensed, it begins your system's normal shutdown procedure with user definable delays for warnings and the start of the final shutdown sequence. These should be tailored to your UPS to ensure things get closed down before the power really dies. Hope this helps, -- Mike Dobson, Sys Admin for | Internet: rdc30med@nmrdc1.nmrdc.nnmc.navy.mil nmrdc1.nmrdc.nnmc.navy.mil | UUCP: ...uunet!mimsy!nmrdc1!rdc30med AT&T 3B2/600G Sys V R 3.2.2 | BITNET: dobson@usuhsb.bitnet WIN/TCP for 3B2 | MCI-Mail: 377-2719 or 0003772719@mcimail.com