Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!julius.cs.uiuc.edu!apple!portal!cup.portal.com!DeadHead
From: DeadHead@cup.portal.com (Bruce M Ong)
Newsgroups: comp.unix.sysv386
Subject: Re: What the . . . (ISC2.0.2 cu(1) problem)
Message-ID: <34483@cup.portal.com>
Date: 3 Oct 90 02:26:08 GMT
References: <34392@cup.portal.com> <34432@cup.portal.com>
Distribution: na
Organization: The Portal System (TM)
Lines: 30


Hi netlanders -

How does one configure a telebit (T1000) to run on an ISC2.02 with the
following requirements:

1. Run UUCP outbound polling mode
2. Enable remote log in with terminal sessions
3. Enable cu(1) occasionally.

???
 
I have, from telebit, the following configuration parameters:

at &f s51=4 s52=2 s53=1 s54=1 s58=2 s66=1 s110=1 s111=30 s45=0 q4 &w <cr>

but I cannot seem to enable uugetty in bidirectional mode (it talks to 
itself and eventually complains about getty spawning too fast). When I 
tried cu with this configuration I could not even get into the terminal
mode with the modem (it kept dropping me back to the shell)... I am sure
there is something wrong with the DCD and DTR interpretations and timing,
but what's the magic number?


thanks for any hints - 

(please email)

bruce
deadhead@cup.portal.com