Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!rutgers!pyrnj!hhb!leonh
From: leonh@hhb.UUCP (leon howorth)
Newsgroups: comp.unix.ultrix
Subject: UUCP line speed limitation
Keywords: uucp
Message-ID: <582@hhb.UUCP>
Date: 2 Oct 90 21:57:41 GMT
Organization: HHB Systems, Mawah, NJ
Lines: 35

I am running a VAX 11/785 with Ultrix 2.2 (I know, very old release
but I can't upgrade quite yet). I am trying to get uucp to work 
with a Telebit modem on a DMF32 port at 19200 baud. I can run a 
terminal on the port at 19200 but when I try to run uucp I get
a "BAD SPEED" message from uucico and it fails. Leads me to think
that the software does not support that speed, even though the
hardware is capable. Does anyone know of a patch I can apply to
run uucp at 19200 on the port ??   Here are some of the important
administrative entries:

/etc/ttys:	# Note: modem used for outgoing only

ttyd3 "/etc/getty std.19200" dialup off modem    # DMF port1

/etc/acucap:

#Telebit Trailblazer on DMF32 port - outgoing only
tb19200|trailblazer|Telebit Trailblazer-Plus 19200 baud, Touch tone:\
:si:cr:hu:ls:re:ss=\dA\dA\dATZ\r:sr=OK:sd#250000:di=ATS50=255DT:dt=\r:\
:dd#50000:fd#80:rs=,:os=CONNECT:ds=\dA\dA\dATZ\r:ab=\dA\dA\dATZ\r:db:

/usr/lib/uucp/L-devices:

ACU ttyd3 ttyd3 19200 tb19200

/etc/gettytab:

H|std.19200|19200-baud:\
        :sp#19200:

-- 
Leon A. Howorth			|  UUCP:  ....princeton!hhb!leonh
Computer Operations Manager	|  ARPA:  leonh%hhb@princeton.edu
Racal-Redac	 		| VOICE:  201-848-8000 ext. 243
Mahwah, New Jersey 07430	|   FAX:  201-848-8189