Path: utzoo!attcan!uunet!wuarchive!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!ames!haven!decuac!dodads.dco.dec.com!roj
From: roj@dodads.dco.dec.com (Roger Masse)
Newsgroups: comp.unix.ultrix
Subject: Re: Using HP LaserJet with DS3100
Keywords: HP LaserJet, DS3100, Error number 22
Message-ID: <1990Oct3.102832@dodads.dco.dec.com>
Date: 3 Oct 90 14:28:32 GMT
References: <28325@pasteur.Berkeley.EDU>
Sender: news@decuac.dec.com (Network News)
Reply-To: roj@dodads.dco.dec.com (Roger Masse)
Organization: Washington ULTRIX Resource Center
Lines: 17

This may be stating the obvious, but is flow control (XON-XOFF) enabled on
your laserjet?  Are you using lpr(1) for spooling.  If so, what does your
/etc/printcap entry look like?

|> From: hung@hydrogen.cchem.berkeley.edu (Hung H. Le)
!>	Intermittently, the LaserJet stopped with the error number 22
|>     (receiving buffer has overflowed during a busy state).

Regards,

        Roger Masse'
                                       
        8301 Professional Place          Digital Equipment Corporation
        Landover, Maryland, 20785        Washington ULTRIX Resource Center 
        Internet: roj@dco.dec.com        uucp: decvax!decuac!roj

        Disclaimer:  My opinions do not necessarily represent anything.