Path: utzoo!attcan!uunet!samsung!sol.ctr.columbia.edu!srcsip!msi-s0.msi.umn.edu!umeecs!zip.eecs.umich.edu!hucka From: hucka@eecs.umich.edu (Michael Hucka) Newsgroups: comp.unix.ultrix Subject: Re: Need ifconfig help on DEC 5000/200 Message-ID: Date: 4 Oct 90 01:41:53 GMT References: Sender: news@zip.eecs.umich.edu Distribution: comp Organization: University of Michigan Lines: 28 In-Reply-To: mellon@fenris.pa.dec.com's message of 25 Sep 90 22:23:01 GMT In article mellon@fenris.pa.dec.com (Ted Lemon) writes: From: mellon@fenris.pa.dec.com (Ted Lemon) Newsgroups: comp.unix.ultrix Date: 25 Sep 90 22:23:01 GMT References: Have you reconfigured the kernel to recognize the new device? There should be a line like the following in your /usr/sys/conf/mips/NAME file (where NAME is the capitalized name of your machine) that looks like the following: device ln1 at ibus? vector lnintr You can leave in the line that looks like this... device ln0 at ibus? vector lnintr ...if you aren't planning on using the ThinNet interface... _MelloN_ Thanks -- this was indeed the problem; the kernel wasn't set up to recognize the new device. Mike -- Mike Hucka | ARPA: hucka@caen.engin.umich.edu University of Michigan AI Lab | 1101 Beal Ave., Ann Arbor, MI 48109