Path: utzoo!attcan!uunet!aplcen!samsung!cs.utexas.edu!yale!bunker!hcap!hnews!129!26!Stu.Turk
From: Stu.Turk@f26.n129.z1.fidonet.org (Stu Turk)
Newsgroups: misc.handicap
Subject: Re: TDD Bulleting Boards!
Message-ID: <14612@bunker.UUCP>
Date: 2 Oct 90 14:29:02 GMT
Sender: wtm@bunker.UUCP
Reply-To: Stu.Turk@f26.n129.z1.fidonet.org
Distribution: misc
Organization: FidoNet node 1:129/26 - SoundingBoard, Pittsburgh PA
Lines: 24
Approved: wtm@bunker.UUCP

Index Number: 10779

[This is from the Silent Talk Conference]

Wayne Roorda of 1:385/14 wrote to Doug Boone: 

 WR>  The one in Trenton works just fine with a Minicom IV TDD but does 
 WR>  not work at all when attempting to use an XT Clone with an 
 WR>  internal 2400 baud modem [set at 300] and using Procomm (no 
   =
   If you decide to try it again, try setting your comm prgm to 7O2 (7 data 
bits, Odd parity, 2 stop bits) and see if that makes any difference.
   
    I agree with you though, it would not be worth Doug's efforts to add TDD 
capabilities to Opus for the few people who might use it to chat but still not 
be able to read msg's because of the one-line display.
   Vixen has her (TBBS) board set up to accept TDD's (ASCII only I believe) but 
I think she said she has a seperate msg area for the TDD's with a much smaller 
menu.
 

--
Uucp: ..!{decvax,oliveb}!bunker!hcap!hnews!129!26!Stu.Turk
Internet: Stu.Turk@f26.n129.z1.fidonet.org