Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!swrinde!dptspd!iquery!matt
From: matt@iquery.UUCP (Matt Reedy)
Newsgroups: comp.dcom.lans
Subject: Re: WD8003E <> WD8013
Message-ID: <362@iquery.UUCP>
Date: 7 Oct 90 01:29:55 GMT
References: <1990Oct3.150321.27149@ccu.umanitoba.ca> <1096@ncis.tis.llnl.gov>
Followup-To: comp.dcom.lans
Organization: Programmed Intelligence, San Antonio
Lines: 21

In article <1096@ncis.tis.llnl.gov> paik@lance.tis.llnl.gov (Yunki Paik) writes:
>
>Here is my experience. NCSA telenet (CUTE 2.2d) will *not* work with 
>16bit WD8013.  It will, however, works if you use packet driver.
>
>So, the answer to your question is NO, but some will work.
>

My experience is that Interactive TCP/IP & NFS 1.2 on a 386 *does* work with the
8013 - although I haven't had enough time to benchmark the speed differences
between the 8003 and 8013.

Also, PC-NFS on MS-DOS *works* fine with the 8013 - we have 3 8013's and
about 9 8003's on a network and run the same software on all of them.

matt
-- 
Matthew Reedy                 UUCP: uunet!iquery!matt
Programmed Intelligence Corp.
400 N Loop 1604 E, Suite 100
San Antonio, TX  78232        (512) 490 6684  Fax: (512) 490-3590