Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!uflorida!unf7!sjrpp!asbuilt
From: asbuilt@sjrpp.UUCP (SJRPP CAD Drafting Staff)
Newsgroups: comp.graphics
Subject: Re: Conversion between TIFF/RLC formats
Message-ID: <2028@sjrpp.UUCP>
Date: 3 Oct 90 21:53:14 GMT
References: <1839@nvuxr.UUCP>
Reply-To: asbuilt@sjrpp (SJRPP CAD Drafting Staff)
Distribution: na
Organization: St. Johns River Power Park, Jacksonville, Fl.
Lines: 20

In article <1839@nvuxr.UUCP> wjs@nvuxr.UUCP (W.SCHMIDT) writes)
 :-) 
 :-) I'm trying to convert TIFF files to RLC files
 :-) under MS-DOS.
 :-) Does anyone have a translator to do this?
 :-) 
 :-) Bill Schmidt


We got one with our scanner. It's an IDEAL CONTEX FSS 3012e.
The software only works with their interface board, but if you
ask maybe they can point you in the right direction.
There number is +1-301-468-0123 (somewhere on the east coast).

Eddie Turner

-- 
CADD Drafting Staff     UUCP:...gatech!uflorida!unf7!sjrpp!asbuilt
St. Johns River Power Park -------- Technical Services Deptartment
Jacksonville, FL 32226                         PHONE:(904)751-7835