Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!know!sdd.hp.com!ucsd!orion.oac.uci.edu!uci.edu!pschnack
From: pschnack@uci.edu (Peter Schnack)
Newsgroups: comp.protocols.appletalk
Subject: FastPath, atalkad and NetBridge
Message-ID: <2714FB30.25604@orion.oac.uci.edu>
Date: 11 Oct 90 23:07:28 GMT
Distribution: na
Organization: University of California, Irvine
Lines: 31
Nntp-Posting-Host: quixotic.acs.uci.edu

I am having trouble configuring a FastPath and a NetBridge using the 
atalkad from CAP. 

The question:
How do I configure the atalkatab to show the the zone on the otherside of 
the NetBridge?

The problem:
         -------          -------
 Zone B  | net  | Zone A  | FP4 | Lots-o-Zones
---------|bridge|---------|     |-------
         --------         -------
From a Chooser on Zone B you see Zone A and Zone B.
From a Chooser on Zone A you will alternately approx every 10 seconds see 
just Zone A and Zone B: Then you will see Lots-o-Zones, Zone A and I think 
Zone B though you cannot see the services on the Lots-o-Zones side.

If you turn off the NetBridge everything works fine (except of course the 
Zone B is isolated :-)

Background and other information:
Shiva were the ones that suggested adding the Zone information for Zone B 
to the atalkatab, but could not help me with how.

We have about 9 FP's connected around campus through a TCP/IP only 
backbone with the atalkad, this is the first time I have had a multi-zone 
LocalTalk network on the LocalTalk side of the FP.

Thanks

pschnack@orion.oac.uci.edu