Xref: utzoo comp.sys.amiga:68099 comp.sys.amiga.hardware:3905
Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!wuarchive!udel!brahms.udel.edu!jeremym
From: jeremym@brahms.udel.edu (Jeremy A Moskowitz)
Newsgroups: comp.sys.amiga,comp.sys.amiga.hardware
Subject: Re: More Power...
Message-ID: <14385@brahms.udel.edu>
Date: 7 Oct 90 18:12:01 GMT
References: <1104@sjfc.UUCP>
Followup-To: comp.sys.amiga
Organization: University of Delaware
Lines: 29

In article <1104@sjfc.UUCP> bpv9073@sjfc.UUCP (Brett VanSprewenburg) writes:


>I have a question concerning my wimpy power supply on my A500. I have
>had a 63.5 watt IB* XT power supply fall into my lab for a very good
>price. (Read free). I wish to replace my stock baby A500 supply with it.
>I have identified the proper lines on the XT supply (+5v,+12v,-12,gnd) from
>the main outputs of the XT supply. (Anyone familier with one knows
>that there are about 15 wires there.)
>
>
>If you can save my butt, thanks very much in advance...
>...rutgers!cci632!sjfc!bpv9073


Ok Bret... I have your answer... but... there are two things.
First of all, the file that gives great schematics and good
technical information was just wiped off my Hard Drive.

The good news is, is that it is availiable on Compu$erve. But
don't fret, ma frind. I'm going to be on today, and when I do...
I'll try to mail it to you. Or, better yet... I'll
send the whole thing as an FTP to abcdefhgh...etc. etc...
so.. that way, everybody can benifit from it.
 
I'll call it XTPOWER.lzh or something. so look for it.
This *WILL* solve your problem...

jeremym@brahms.udel.edu