Path: utzoo!attcan!uunet!decwrl!wuarchive!cs.utexas.edu!helios!tamuts!n350bq
From: n350bq@tamuts.tamu.edu (Duane Fields)
Newsgroups: comp.sys.amiga
Subject: Re: Amax II partition
Message-ID: <8925@helios.TAMU.EDU>
Date: 9 Oct 90 16:10:36 GMT
References: <9010091338.AA23337@terra.oscs.montana.edu>
Sender: usenet@helios.TAMU.EDU
Organization: Texas A&M University
Lines: 31

I tried using DOSINFO to create a mountlist, but it didn't work. After removing any lines that "MOUNT" claimed were 'errors', it apparently mounts, and 
subsequent mount attempts return "already mounted"; yet, the partitition is not
available to amax, nor does it turn up on info lists... what gives?? Here is 
my mountlist entry:

#  
 
Amax1: 
	Device         = scsi.device
	Unit           = 6
	Flags          = 0
	FileSystem     = ffsystem
	GlobVec        = 0
	BlockSize      = 128
	Surfaces       = 1
	BlocksPerTrack = 49
	Reserved       = 2
	PreAlloc       = 0
	Interleave     = 0
	LowCyl         = 1880
	HighCyl        = 2084
	Buffers        = 50
	BufMemType     = 0
	MaxTransfer    = 0x00FFFFFF
	Mask           = 0x7FFFFFFE
	BootPri        = 0
	DOSType        = 0x444F5301
#
 

Thanks...