Path: utzoo!attcan!uunet!decwrl!wuarchive!zaphod.mps.ohio-state.edu!uwm.edu!bionet!arisia!mohabir
From: mohabir@arisia.Xerox.COM (Daniel A. Mohabir)
Newsgroups: comp.sys.amiga.hardware
Subject: pull-up resistors for Miniscribe 3180S
Message-ID: <13018@arisia.Xerox.COM>
Date: 8 Oct 90 17:50:22 GMT
Reply-To: mohabir@arisia.UUCP (Daniel A. Mohabir)
Organization: DS, XEROX
Lines: 14

I have a Miniscribe 3180S SCSI hard drive (5.25 inch half-height 180 megs
unformatted). I have lost the pull up resistor packs for this drive. It 
works fine if I have another drive after it physically (hence I do not 
need the resistor packs), but if I use the drive by itself, I get intermittent 
errors (more often that not). Does anyone know what the values of the resistor 
packs are? Any info would be appreciated.
Thanks.


-- 
|******************************|*****************|********************|
|  Daniel A. Mohabir           |  Phone:         |  Amiga.            |
|  Email: mohabir@arisia.UUCP  |  (716)427-1886  |  Just do it!       |
***********************************************************************