Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!ccut!wnoc-tyo-news!scslwide!wsgw!headgw!shigw!cvgw!yamanaka From: yamanaka@cv.sony.co.jp (Brian YAMANAKA) Newsgroups: comp.sys.amiga.hardware Subject: RE: A2286 BridgeBoard and A3000 Message-ID: Date: 11 Oct 90 08:35:40 GMT Sender: news@cv.sony.co.jp (Usenet News System) Distribution: comp.sys.amiga.hardware Organization: Sony Corporation, Consumer Video Group Lines: 24 I'm not from Commodore but I do have a 3000 and I do have a 286 Bridgeboard. So far the BB works fine if the binddrivers is the first command in my startup-sequence and there are no floppies loaded. Strange, but it always works. This is only under 2.0 With 1.3 I used my old startup from my 2500/30 and all works fine. I think that I do issue binddrivers before setCPU turns on anything. It has always seemed that the BB was always a bit sensitive to timing. I hope somone at Commodore can give a more clear cut solution. If you hear anything could you please post your response or send me e-mail. Right now I'm stuck in Japan in search of a Commodore dealer, especially one that speaks English. Brian yamanaka@cv.sony.jp -- --------------------------------------------------- Brian YAMANAKA Sony Corporation, Consumer Video Group Email: yamanaka@cv.sony.co.jp