Newsgroups: comp.sys.apple2
Path: utzoo!utstat!philip
From: philip@utstat.uucp (Philip McDunnough)
Subject: Re: GSSauce card by Harris Labs
Message-ID: <1990Oct6.052830.4438@utstat.uucp>
Date: Sat, 6 Oct 90 05:28:30 GMT
References: <8b3EXXi00Vo90VUFwE@andrew.cmu.edu>
Organization: Statistics, U. of Toronto

In article <8b3EXXi00Vo90VUFwE@andrew.cmu.edu> gt0t+@andrew.cmu.edu (Gregory Ross Thompson) writes:
>
>  I've got a question for all of you GSSauce owners.  I just mailed
>away the check for an unpopulated GSSauce card, and I'm wondering what
>speed SIMMs I should get for it. 

I have the Harris card on a ROM03( this is the GS Sauce). I used 80 ns
one meg SIMMS. 70/80ns should be more than enough! Any of the 
accelerators now out use caching in any case.

The board takes up to 4 megs of RAM(using 1 meg SIMMS) or up to 1 meg if
you use 256k SIMMS. It's a really nice product. Make sure you get LOW
PROFILE SIMMS as the SIMMS come rather close to any board you might have
in slot 7. I don't know why the SIMMS point inwards. I would say that was
my only complaint.

Philip McDunnough
University of Toronto-> philip@utstat.toronto.edu
[my opinions]