Path: utzoo!attcan!uunet!wuarchive!rex!ames!pasteur!dog.ee.lbl.gov!nosc!crash!pro-sol.cts.com!del
From: del@pro-sol.cts.com (James Delaluz)
Newsgroups: comp.sys.apple2
Subject: Re: Connecting Non-Apple Printer To IIc
Message-ID: <4867@crash.cts.com>
Date: 8 Oct 90 05:56:05 GMT
Sender: root@crash.cts.com
Lines: 17

In-Reply-To: message from cetatman@miavx1.acs.muohio.edu

Curt,
    Here is the Pinout to the IIc modem port:
   pin 1 - data terminal ready output
   pin 2 - transmit dat output
   pin 3 - power and signal ground
   pin 4 - read data input
   pin 5 - data set ready input

You should be able to pick up a connecter at any Radio Shack in the area.
(not the best place to go for the best price, but it is convienent).
Hope this helps your efforts.  I suggest you be very careful in wiring a
cable to connect your printer to the IIc.  Good Luck!

                      Jim DeLaLuz       San Diego, Ca
                      del@pro-sol