Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!snorkelwacker!apple!agate!volcano.Berkeley.EDU!kawakami
From: kawakami@volcano.Berkeley.EDU (John Kawakami)
Newsgroups: comp.sys.atari.st
Subject: Re: MAC DRIVE WITH ATARI ST?
Message-ID: <1990Oct9.191528.932@agate.berkeley.edu>
Date: 9 Oct 90 19:15:28 GMT
References: <1990Oct9.124141.8623@ncsuvx.ncsu.edu>
Sender: usenet@agate.berkeley.edu (USENET Administrator)
Reply-To: kawakami@volcano.Berkeley.EDU (John Kawakami)
Organization: ucb
Lines: 15

First, you need a HOST ADAPTER.  They are available from ICD, BMS of
Oakland (see the phone book), and Supra.

Second, to connect the Mac, you need a 50pin SCSI to Centronics cable.
They seem to be easy to make, but you can buy one from Supra.

Look at spending near $150 to connet the Mac drive.


Forget about the floppy unless you are a hardware engineer.


John Kawakami                  kawakami@ocf.berkeley.edu
                               ucbvax!ocf.berkeley.edu!kawakami
Amateur crank!                 My Atari Macks!