Xref: utzoo comp.unix.ultrix:4811 comp.sys.dec:4195
Path: utzoo!attcan!uunet!mcsun!ukc!tcdcs!swift.cs.tcd.ie!mcanally
From: mcanally@swift.cs.tcd.ie
Newsgroups: comp.unix.ultrix,comp.sys.dec
Subject: Re: Problem getting LAT printers to work on Ultrix V4.0
Message-ID: <7124.270c660e@swift.cs.tcd.ie>
Date: 5 Oct 90 10:53:02 GMT
References: <7113.26fc941d@swift.cs.tcd.ie>
Organization: Computer Science Department, Trinity College Dublin
Lines: 28

In article <7113.26fc941d@swift.cs.tcd.ie>, michael@swift.cs.tcd.ie writes:
> We are having problems getting printers going using ports on a DECSERVER-200
> under Ultrix version 4.0, even though these seem to work on Ultrix 3.0 and on
> VMS 5.2.
> 
> We think we have followed the instructions in the manual.
> 
> Has anybody got LAT printers going under Ultrix 4.0 and did they have to do
> anything special ?

Thanks to all who responded to the newsgroup or directly be e-mail.
Having followed the instructions in the manual, the one extra thing that needed
to be done, was to check that daemon had access to the tty file used in /dev 
(e.g. /dev/tty03) to make the connection to the decserver. In /etc/rc.local
we have an entry /etc/lcp -s -h /dev/tty03 and in /etc/printcap there must be
an entry for the name of the decserver and the name of the port on the 
decserver that is used. e.g. :ts=DSB: :op=PORT_2: 

After /etc/printcap has been modified, the printer daemon lpd has to be killed
and restarted. 
				
Thanks to all who helped sort out the problem.
--
 ,
Maire Mc Anally 	 	| eMail:   	mcanally@cs.tcd.ie
Department of Computer Science,	|
Trinity College,                | voice:   +353-1-772941 ext 1695
Dublin 2, Ireland               | FAX:     +353-1-772204