Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!hp-pcd!hpfcso!hpfcdc!perry
From: perry@hpfcdc.HP.COM (Perry Scott)
Newsgroups: comp.sys.hp
Subject: Re: stty on hp9000s300
Message-ID: <5570509@hpfcdc.HP.COM>
Date: 9 Oct 90 18:37:53 GMT
References: <1510004@hparc0.HP.COM>
Organization: HP Fort Collins, Co.
Lines: 12

>i think it is more accurate to state that when the "first" open(2) occurs
>on a serial port, the "stty values" are set to a driver-dependent value,
>typically picked up from the interface board.  no -default- settings on
>board? well, expect 300 baud, ...
>
>-graham "representing noone's view but his own"


The 300 ignores any port configuration switches.  The port, when first
opened, takes on the default values, as documented in TERMIO(7).

Perry Scott