Path: utzoo!utgpu!cunews!bnrgate!bigsur!bnr-rsc!bcarh471.bnr.ca!pdwalker
From: pdwalker@bcarh471.bnr.ca
Newsgroups: comp.sys.hp
Subject: driving a terminal at 19.2 kbaud
Message-ID: <3443@bnr-rsc.UUCP>
Date: 12 Oct 90 00:52:41 GMT
Sender: news@bnr-rsc.UUCP
Reply-To: pdwalker@bcarh471.bnr.ca ()
Distribution: na
Organization: BNR Ottawa, Canada
Lines: 17

Just a short trivia question here:

It is possible to drive a terminal residing off the rs-232 port of
an HP 9000/345 (HP-UX 6.5) at 19200 baud?

If so, how do I configure the device for the serial port to do 
this?

Thanks in advance.

Paul

/****************************************************************************
 * Paul D. Walker               PHONE : (613)765-2590                       *
 * Bell-Northern Research, Ltd. BITNET: pdwalker@bnr.ca                     *
 * Ottawa Ontario Canada        USENET: ...!uunet!bnrgate!bcarh471!pdwalker *
 ****************************************************************************/