Path: utzoo!attcan!uunet!cs.utexas.edu!swrinde!ucsd!ucbvax!ucdavis!iris.ucdavis.EDU!lasky From: lasky@iris.ucdavis.EDU (Ty Lasky) Newsgroups: comp.sys.ibm.pc.hardware Subject: Good Mail Order Company Keywords: EPS, 386, Mail Order Message-ID: <7813@ucdavis.ucdavis.edu> Date: 11 Oct 90 18:33:13 GMT Sender: usenet@ucdavis.ucdavis.edu Reply-To: lasky@iris.ucdavis.EDU (Ty Lasky) Organization: Robotics Research Laboratory Lines: 67 I just wanted to let the group know about what I feel is a very good mail order company. I just bought a 386/33 MHz machine from a company called EPS. They advertise in PC magazine sometimes. The total cost of the system was $4000. The thing that attracted me to EPS was that they tell you exactly what components you will be getting in your system, unlike other mail order companies who say, for example, that you will get a 14 inch VGA monitor, and you don't know who makes it, what the dot-pitch is, whether it is interlaced, etc.. There is a good reason that EPS is willing to tell you what will be in your system: they use some of the best components available throughout the entire system. 386/33MHz Motherboard, AMI BIOS. 4 MHz RAM (0 Wait State) 64K (25 ns) Static RAM Cache 200 Watt power supply 2 serial/ 1 parallel /1 Game port 1 32 bit slot / 5 16 bit slots / 2 8 bit slots Teac 1.2 and 1.44 MB Floppy Drives Micropolis 1654-7 160 Meg HD (16 ms access time) Adaptec 64k Cache Controller Sony CPD 1304 Color VGA (0.25 dot pitch, 1024x768 non-interlaced) Orchid Pro-designer II with 1 MB video RAM 101 Keyboard DOS 3.3 or 4.01 QEMM 386 1 Year Warranty / On Site Service (TRW) 60 Day Money Back Guarantee (First 30 days no restock fee) As you can see, this baby is loaded. You can get a 386/33 machine for cheaper, but not with a comparable configuration. EPS also has really good service. The salesman that I talked with, Todd Booge, was very helpful and willing to deal a little bit with any customizations that I wanted for the system. The only thing that is lacking on this system is good documentation. You just get a bunch of manuals from the various manufacturers, but no manual for the overall computer system. So, if you really need good documentation, you may want to consider this. However, EPS does have really good tech support too. Disclaimer: I have no affiliation with EPS other than as a satisfied customer. I just wanted to pass this information on to the network. Do with it what you will. If you ARE in the market for a new computer, then I think this company is at least worth checking out. As usual, your mileage may vary. Ty A. Lasky University of California, Davis Department of Electrical Engineering and Computer Science Robotics Research Laboratory Internet TALASKY@ucdavis.edu or lasky@iris.ucdavis.edu BITNET TALASKY@ucdavis UUCP {ucbvax, lll-crg, sdcsvax}!ucdavis!TALASKY or {ucbvax, lll-crg, sdcsvax}!ucdavis!iris!lasky