Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!rutgers!dimacs.rutgers.edu!srm From: srm@dimacs.rutgers.edu (Scott R. Myers) Newsgroups: comp.sys.ibm.pc.misc Subject: Re: SCSI driver & QEMM Message-ID: Date: 7 Oct 90 17:11:43 GMT References: <9558@uhccux.uhcc.Hawaii.Edu> <1083@applix.com> Distribution: usa Organization: Rutgers University Lines: 32 In article <1083@applix.com> scotte@applix.com (Scott Evernden) writes: >In article <9558@uhccux.uhcc.Hawaii.Edu> wan@uhccux.UUCP (Dadong Wan) writes: >Does anyone out there know how I can make an SCSI HD driver (Mactor XT8380, >360 MB) work with QEMM386? I had a problem with using a Plus Impulse Drive and a IDE drive where in both cases the controller card had its own BIOS. The fix for me in this case was to find the Memory address for the cards and put this in my config.sys device=qemm.sys exclude=c800-c9ff ram ^^^^^^^^^^^^^^^^^ This piece right here tells qemm to stay away from segment of memory. Hope this helps... srm -- Scott R. Myers Snail: 26 Stiles Street Phone:(201)352-4162 Apartment 18 Elizabeth, NJ 07201 Arpa: srm@dimacs.rutgers.edu Uucp: ..!dimacs!srm "... No matter where you go, there you are ..."