Path: utzoo!attcan!uunet!tut.cis.ohio-state.edu!ucsd!usc!apple!portal!cup.portal.com!Loopy
From: Loopy@cup.portal.com (Justin Randall Padawer)
Newsgroups: comp.sys.mac.hardware
Subject: Re: LaserwriterIINTX
Message-ID: <34642@cup.portal.com>
Date: 8 Oct 90 03:56:43 GMT
References: <30024@netnews.upenn.edu>
  <1990Sep30.055417.28261@dhw68k.cts.com>
Distribution: na
Organization: The Portal System (TM)
Lines: 4

The IINTX can be connected directly to the Printer port using a cable. 
The IINTX has a 25 pin serial port.  Also some of the dip switches will
need to be changed.  These dip switch changes should be covered in the
NTX manual.  Hope this helps.