Path: utzoo!attcan!uunet!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!wuarchive!udel!rochester!pt.cs.cmu.edu!o.gp.cs.cmu.edu!andrew.cmu.edu!wb1j+ From: wb1j+@andrew.cmu.edu (William M. Bumgarner) Newsgroups: comp.sys.next Subject: Re: Why no floppy upgrade? Answer. Message-ID: Date: 10 Oct 90 19:39:03 GMT References: <5734@mace.cc.purdue.edu> , <7704@darkstar.ucsc.edu> Organization: Carnegie Mellon, Pittsburgh, PA Lines: 20 In-Reply-To: <7704@darkstar.ucsc.edu> I don't know the serial numbers, but there is a very easy way to tell if you have 4 half-height bays or two full-height bays. Remove the back cover and check out the power-supply/drive chassis (no need to pull it out). If you have an old style chassis, then there will be only two sets of drive screw holes (filled by an OD and a drive). If you have the new type, there will be four sets of holes. b.bum b.bumgarner | Disclaimer: All opinions expressed are my own. wb1j+@andrew.cmu.edu | I officially don't represent anyone unless I NeXT Campus Consultant | explicity say I am doing so. So there. "I ride tandem with the random/Things don't run the way I planned them.."