Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!rice!rice!sun-spots-request
From: wells@zach.fit.edu (James M. Wells)
Newsgroups: comp.sys.sun
Subject: Adding a SCSI floppy drive to a SUN 3/140.
Keywords: Hardware
Message-ID: <1990Oct7.220235.23650@rice.edu>
Date: 7 Oct 90 21:30:00 GMT
Sender: sun-spots-request@rice.edu
Organization: Sun-Spots
Lines: 15
Approved: Sun-Spots@rice.edu
Originator: spots@walhalla.rice.edu
X-Sun-Spots-Digest: Volume 9, Issue 325, message 6

I am trying to get a Panasonic 1.2 mb 5 and 1/4 drive on an OMTI 20D SCSI
controller running on a SUN 3/140.

This equipment came without any software (driver) and I can't see any way
that my kernel (4.0.3) can be configured to support it.

Any suggestions would be appreciated.  When I say there isn't any
software, actually the SCSI controller is already running a tape drive and
a hard disk, but I can't figure out how to get it to run the floppy drive.

Thankyou.

James M. Wells, Florida Institute of Technology
150 W. University Blvd., Melbourne, FL 32901. +1 407 768 8000 x7285
wells@zach.fit.edu