Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!rice!rice!sun-spots-request
From: tom@viewlogic.com (Thomas Yen)
Newsgroups: comp.sys.sun
Subject: Re: Switching from thin to thick Ethernet on a Sun 3/50
Keywords: Hardware
Message-ID: <1990Oct7.221341.25310@rice.edu>
Date: 7 Oct 90 21:30:00 GMT
Sender: sun-spots-request@rice.edu
Organization: Sun-Spots
Lines: 15
Approved: Sun-Spots@rice.edu
Originator: spots@walhalla.rice.edu
X-Sun-Spots-Digest: Volume 9, Issue 328, message 10
X-Refs:  Original: v9n302, Replies: v9n307 v9n312

In article <1990Sep12.180306.12073@rice.edu>, mikem@se-sd.sandiego.ncr.com (Mike Miller) writes:
|> In article <1990Aug13.011115.5713@rice.edu> matt@antioch.acns.nwu.edu (Matthew Larson) writes:
|> 
|> The ethernet interface is switchable between thin and thick via a dip on
|> the mother board.  you will need to open the cpu box (4 allen screws) and
|> pull the mother board.  The dip should be located near your ethernet
|> connectors.  It could also be located in a different area as a set of
|> jumpers.  I'd just call Sun if I couldnt find it, they'll tell you where.
|> Anyway, the dip or jumper settings are in the Hardware Installation
|> manuals. Or ask local Sun.

	Here I think is the correct jumper setting at J800

13-14                In                                      Thicknet
13-14                Out                                     Thinnet (Default)