Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!munnari.oz.au!mel.dit.csiro.au!latcs1!kevin
From: kevin@latcs1.oz.au (Kevin James Bertram)
Newsgroups: comp.sys.transputer
Subject: Transputer reset
Keywords: reset
Message-ID: <8972@latcs1.oz.au>
Date: 10 Oct 90 23:23:06 GMT
Organization: Comp Sci, La Trobe Uni, Australia
Lines: 14


	I have a question concerning the Transputer of which no answer
has become obvious through either the data sheets or normal contact.
The problem is: should the ERROROUT signal of any of the CPU's get reset
                to an inactive state after a reset. (not analyse state)?
                This is assuming that the CPU does not have an ERRORIN
                input, or if it did then it is at a inactive state.

I ask this because my experience says it doesn't. At least with the T8's
and T414's. BUT T400 do clear their ERROROUT line on reset. So which is
true? Is it luck that the T400's do reset ERROROUT?

Thanks.
	-Kevin  (kevina@latcs1.oz)