Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!wuarchive!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!uflorida!mailer.cc.fsu.edu!sun13!news
From: news@sun13.scri.fsu.edu (Usenet News File Owner)
Newsgroups: comp.sys.zenith.z100
Subject: Re: Hard disk info?  Send me some too (POST IT HERE FOR ALL TO SEE) ...
Message-ID: <1040@sun13.scri.fsu.edu>
Date: 8 Oct 90 02:46:45 GMT
References: <1394@necis.UUCP> <187@salt.UUCP> <1867@nemesis.stsci.edu>
Reply-To: zateslo@geomag.gly.fsu.edu (Ted Zateslo)
Organization: Florida State University Geology Dept.
Lines: 26

kit includes a standard PC-compatible hard drive controller and an
S-100 card that adapts the controller to the Z-100's bus.  The
controller is an MFM type, so the ST-225 should work fine.  (We used
an ST-138 (MFM) that was lying around.)
From: zateslo@geomag.fsu.edu (Ted Zateslo)
Path: geomag!zateslo

UCI claims that the regular Z-100 PREP and PART should work, but they
also provide their own formatting utility which we used (successfully).
The only problem we ran into was mounting the PC HD controller: the 
hardware provided (double-stick foamy tape) didn't fit the particular
controller card they sent.  We just made our own sticky-foam mount.
The setup has worked fine for about 3 months now.

I don't have UCI's address handy (I will look up and E-mail to
interested parties), but we paid $288 for our kit from a distributor,
Payload
15718 Sylvan Lake
Houston, TX 77062
(713) 486-0687

Usual disclaimers...

Ted Zateslo, Geology Dept., Florida State University
Internet: zateslo@geomag.gly.fsu.edu