Xref: utzoo comp.sys.ibm.pc.misc:2510 comp.unix.sysv386:1106
Path: utzoo!attcan!uunet!hacker!steve
From: steve@hacker.UUCP (Stephen M. Youndt)
Newsgroups: comp.sys.ibm.pc.misc,comp.unix.sysv386
Subject: Getting to my new memory.
Keywords: I know it's there, I plugged in the chips myself.
Message-ID: <202@hacker.UUCP>
Date: 10 Oct 90 12:01:08 GMT
Followup-To: poster
Organization: HaL Systems, Burke, VA
Lines: 12

I put another 4 meg of RAM into my AMAX386/20 Motherboard, and can't for the
life of me get to it no matter what I do in the C&T setup program.  It just
doesn't want to enable banks 2 and 3 (0 & 1 were populated when I bought the
board).  Is there something I need to do on the board?  I've got no docs on
the board, and it's fairly old (over a year :-), so I'm not sure what my
chances are, but I need that memory!!  This is definitely something in the
setup or on the board as the selftest only does the first four meg (as it 
always has), tells me that banks 0/1 are 0 wait state and 2/3 are DISABLED.
Please help!!! -- SMY
-- 
Stephen M. Youndt       /   "Remember, no matter where you go, 
uunet!hacker!steve     /     there you are."  -- B. Banzai