Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!apple!agate!violet.berkeley.edu!ilan343
From: ilan343@violet.berkeley.edu (Geraldo Veiga)
Newsgroups: comp.unix.sysv386
Subject: Re: Mixture of ISC 2.0.2 and 2.2 system softwares
Message-ID: <1990Oct11.215452.10749@agate.berkeley.edu>
Date: 11 Oct 90 21:54:52 GMT
References: <9010111913.AA15356@decpa.pa.dec.com>
Sender: usenet@agate.berkeley.edu (USENET Administrator)
Organization: University of California, Berkeley
Lines: 16

In article <9010111913.AA15356@decpa.pa.dec.com> paine@fungus.dec.com (Willy Paine) writes:
>Cc: paine (Willy Paine)
> 
> 
>My story on installing over 1023 cyclinder hard drive is not over yet
>and it is really long story but I make it short.
> 
>Right now I am running ISC Unix 2.2 in my Compaq 386's 300 megB hard 
>and I want to replace this with 650 megB SpeedStor and Adaptec controller.
> 
>For example, v2.2 install dont work
>with >1024 cycl and 16 bits VGA unless this replaces with 8 bits video
>card.  I have tried this but no luck.
> 
I tried ISC 2.2 on a system with a Maxtor XT-4230 (1222 cyls),  Adaptec
ACB 2223B-8 and a Paradise 1024 (a 16-bit VGA card).  Installed fine.