Xref: utzoo comp.sys.dec:4216 comp.unix.ultrix:4852
Path: utzoo!attcan!uunet!decwrl!wuarchive!cs.utexas.edu!sun-barr!rutgers!cbmvax!grr
From: grr@cbmvax.commodore.com (George Robbins)
Newsgroups: comp.sys.dec,comp.unix.ultrix
Subject: Re: Adding a second SCSI card to a DS5000
Message-ID: <14979@cbmvax.commodore.com>
Date: 9 Oct 90 08:08:03 GMT
References: <1990Oct8.183825.7915@squirrel.mh.nl>
Reply-To: grr@cbmvax.commodore.com (George Robbins)
Distribution: comp
Organization: Commodore, West Chester, PA
Lines: 20

In article <1990Oct8.183825.7915@squirrel.mh.nl> Johan Vromans <jv@mh.nl> writes:
> Hi folks,
> 
> I have had a second SCSI card added to my DS5000. When I type "cnfg"
> to the monitor prompt, I get (a.o):
> 
>   5: PMAZ-AA	DEC	V5.3b	TCF0	(SCSI = 7)
>   0: PMAZ-AA	DEC	V4.1	PDE3
> 
> The first line is the standard SCSI card, the second is the one that
> was added. However, the system does not see it as a SCSI card.

Are you running the generic kernel or one that has been customized.
Make sure it has appropriate entries for the second scsi controller.
See the "BINARY" configuration for examples.

-- 
George Robbins - now working for,     uucp:   {uunet|pyramid|rutgers}!cbmvax!grr
but no way officially representing:   domain: grr@cbmvax.commodore.com
Commodore, Engineering Department     phone:  215-431-9349 (only by moonlite)