Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!munnari.oz.au!sirius.ucs.adelaide.edu.au!levels!etrmg
From: etrmg@levels.sait.edu.au
Newsgroups: comp.os.cpm
Subject: Re: SCSI
Message-ID: <15519.2715c0a8@levels.sait.edu.au>
Date: 12 Oct 90 13:10:00 GMT
References: <37898@ut-emx.uucp> <4862@crash.cts.com> <15501.2711b9d8@levels.sait.edu.au> <4903@crash.cts.com>
Organization: Sth Australian Inst of Technology
Lines: 47

In article <4903@crash.cts.com>, mwilson@crash.cts.com (Marc Wilson) writes:
> In article <15501.2711b9d8@levels.sait.edu.au> etrmg@levels.sait.edu.au writes:
>>In article <4862@crash.cts.com>, mwilson@crash.cts.com (Marc Wilson) writes:
>>> In article <37898@ut-emx.uucp> spam@walt.cc.utexas.edu (Charles E. Watson) writes:
>>>>Does anybody have a used WD1002-05 they could part with? ...or know
>>>>where one could be found?
>>> 
>>>      There seems to be some confusion here... the WD1002-05 is NOT a
>>> SCSI device.  It needs a parallel port.
>>> 
>>>      Presumably this is going into a Kaypro?  You may have better luck
>>> with a 1002-HD0.
>>> 
>>
>>I thought a wd1002-05 was a SASI interface!?  I'll see wots in my Kaypro
>>tonite to resolve this one definitively. . .   I'm in line for two more
>>2-84's for 200$A and will likely need two more of these interfaces as well.
> 
>      This won't tell you anything... the K-10 doesn't use a SASI
> interface, it uses a parallel bus.
> 
>      By now you have found that your Kaypro has one of three boards in
> it:
> 	1) 1002-HD0
> 	   This was the most common board used.  Your 1.9E ( the
> 	   81-302 ) ROM and the U-ROM are set up for this one.
> 	2) 1001-01 ( not sure about the suffix )
>            Early K-10's have 1001's in them.
>         3) 1002-05
>            A weird beastie... has a floppy controller where the HD0
>            has an empty socket.  The 1002-05 and the HD0 are the
>            same functionally except for the floppy bus.
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


Hi:
My K2x has been updated by me using the Emerald Microware system using a WD1002
-05G  REV. Y

My schematic & everything I have that's hardware docs says my "parallel"
interface is a SASI interface.  Maybe we're just talking semantics here, but
It's nice to know what the extra ports are on the 1002!  Do you know where I
can obtain specs on the WD1002-05g?  I would like to get more familiar with
all of it. . .

See ya:
Ronn