Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!rpi!iear.arts.rpi.edu!woody From: woody@iear.arts.rpi.edu (Christopher Widmann) Newsgroups: comp.periphs.scsi Subject: SCSI to ST506????? Message-ID: Date: 17 Oct 90 05:32:06 GMT Organization: Rensselaer Polytechnic Institute, Troy NY Lines: 23 I just found among my piles of PC boards a board about the width and length dimensions of a 5.25" drive. It is labled as a DTC 510X. It has a set of scsi id jumpers, a resistor pack and the 50 pin input and the standard 34pin/2x20pin outs for some sort of ST506 interface. I don't know if it is SCSI to RLL, SCSI to MFM or even how to set it up correctly to work with either an MFM or RLL drive. My WD7000FAST SCSI Exerciser finds a device on the id I set it to, but locks the system up in trying to get its device type and manufacturers code. Does anyone out there is SCSIland have one of these that they are using and can point me in the right direction on what exact interface it is, and how to set some of the jumpers on this card? Please? Thanks. Chris Widmann woody@iear.arts.rpi.edu Chris Widmann --------------------------------------------------------------- woody@iear.arts.rpi.edu - Rensselaer PolyTechniTortureTute "Life is like an ice cream cone, you lick it one day at a time"-Charlie Brown -----------------------------------------------------------------------------