Path: utzoo!attcan!uunet!know!sdd.hp.com!zaphod.mps.ohio-state.edu!swrinde!ucsd!pacbell.com!tandem!netcom!jbreeden
From: jbreeden@netcom.UUCP (John Breeden)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: Packet Drivers for UB Net/One Ethernet Board
Message-ID: <14859@netcom.UUCP>
Date: 16 Oct 90 14:16:52 GMT
References: <9010151955.AA07954@alw.nih.gov> <2457@ux.acs.umn.edu>
Organization: Netcom- The Bay Area's Public Access Unix System {408 241-9760 guest}
Lines: 37

In article <2457@ux.acs.umn.edu> spexet@ux.acs.umn.edu (D. Robert Spexet II) writes:
>In article <9010151955.AA07954@alw.nih.gov> GFX@CU.NIH.GOV (Geoffrey Marsh) writes:
>>
>>  I am trying to install the latest and greatest Clarkson telnet
>>(CUTCP/CUTE 2.2D/2.2TN TC-C) on an IBM PS/2 Model 80 which has an
>>Ungermann-Bass Net/One card in it as the Ethernet interface.  The
>>Clarkson UBNIC.COM packet driver does not function properly with the
>>board, probably since it was meant to run with a UB PC/NIC board.
>
>I'd like to know this also.  We have the same board at our site, except that
>it sits in a Model 55SX.
>

You're right, the ISA/NIC packet driver does not work on the ps2/nic. There
are three solutions.

1. Get rid of the MCA boxes :-)

2. Get the UB NDIS driver set (it includes the driver for the ps2/nic). One
time charge of $50 (free, I'm sure to large UB accounts).

                               - OR -

3. Get the AT&T NDIS driver for the AT&T MC100 card (AT&T used to OEM the
ps2/nic).

Obtain dis_pkt.dos from ftp.vax.com (packet driver interface for an NDIS 
MAC driver). Run dis_pkt on top of either the UB or AT&T ndis mac drivers.
CUTCP and KA9Q will run on top of this.

-- 
 John Robert Breeden, 
 netcom!jbreeden@apple.com, apple!netcom!jbreeden, ATTMAIL:!jbreeden
 -------------------------------------------------------------------
 "The nice thing about standards is that you have so many to choose 
  from. If you don't like any of them, you just wait for next year's 
  model."