Xref: utzoo comp.sources.wanted:13611 comp.sys.hp:6517
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!sol.ctr.columbia.edu!emory!gatech!rutgers!pyrnj!bartal!monymsys!david
From: david@monymsys.uucp (David Kozinn)
Newsgroups: comp.sources.wanted,comp.sys.hp
Subject: talk/talkd for HP-UX 7.0 (summary)
Message-ID: <1990Oct12.161516.7005@monymsys.uucp>
Date: 12 Oct 90 16:15:16 GMT
References: <1990Oct2.170301.29443@monymsys.uucp>
Organization: MONY Financial Services, Microcomputer Systems, Teaneck, NJ
Lines: 51

In article <1990Oct2.170301.29443@monymsys.uucp> I wrote:
>Is there a version of talk/talkd that will run on an HP 9000/815 running 
>HP-UX 7.0? I tried the "berkley" version from uunet, but I keep running 
>into problems getting it compiled. There are several unknown
>#defines (such as TIOCNOTTY), and I'm enough of a novice at this
>that I'm unfamiliar with what's missing and I can't come up with
>suitable replacements (assuming they exist at all). 

I got a number of replies, which I've summarized below. One interesting point
that I found out was that these implementation now use the "ntalk" protocol
socket (518) instead of the older talk socket (517).

 >From: bailey@mcs.kent.edu
 >
 >I have a version which runs under HP-UX 7.0 on the 300 series. I don't
 >see why it shouldn't work on an 800 too. If you can ftp then it's in
 >/dist/talk7.0.tar.Z on hp5.mcs.kent.edu. 
 >
 >---
 >From: milburn@me10.lbl.gov (John Milburn)
 >
 >You can retrieve these from me10.lbl.gov via anonymous ftp.  Versions of
 >talk/talkd for both the series 800 and series 300 machines are available.
 >
 >-r--r--r--   1 root     other     129937 Oct  3 14:42 hp-ux/talk_7.0_300.tar.Z
 >-r--r--r--   1 root     other     203855 Oct  3 14:41 hp-ux/talk_7.0_800.tar.Z
 >
 >The readme file says:
 >
 >Note that this is the BSD 4.3 version of talk which uses the "ntalk"
 >service.  You should have the following entry in /etc/services:
 >ntalk           518/udp         talk
 >It is not compatible with the older talk (which used port 517).
 >The /etc/inetd.conf entry should be like this:
 >ntalk   dgram  udp wait   root  /usr/local/etc/talkd    talkd
 >You may substitute /usr/local/etc/talkd with a path of your choice.
 >
 >-----
 >From: uunet!dartvax!batcomputer!christos (Christos S. Zoulas)
 >
 >There is a version of talk on tesla that compiles on the hp's and
 >a version of phone that does too. You might need the version of
 >the bsd library on tesla too.
 >
 >tesla = tesla.ee.cornell.edu = 128.84.253.11 = 128.84.239.11.

-- 
David Kozinn                     | UUCP:   uunet!vmp!monymsys!david
MONY Financial Services MD 75-14 | Domain: monymsys!david@vmp.com
Glenpointe Centre West           | GEnie:  D.KOZINN 
Teaneck, NJ 07666-6888           | Phone:  +1-201-907-6990