Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!yale!mintaka!bloom-beacon!eru!hagbard!sunic!ericom!eos.ericsson.se!etxtomp
From: etxtomp@eos.ericsson.se (Tommy Petersson)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: help on installing 1meg agnus ...
Keywords: 1meg, Agnus
Message-ID: <1990Oct15.113130.14414@ericsson.se>
Date: 15 Oct 90 11:31:30 GMT
References: <12411@chaph.usc.edu> <1990Oct13.035003.3737@isis.cs.du.edu> <1990Oct13.140016.15067@ericsson.se>
Sender: news@ericsson.se
Reply-To: etxtomp@eos.ericsson.se
Organization: Ericsson Telecom AB
Lines: 15

In article <1990Oct13.140016.15067@ericsson.se> etxtomp@eos.ericsson.se writes:
-What is the installation procedure for the 1meg Agnus on a B2000?
-I don't have the motherboard rev. right here (if it matters), but
-I think it's something like 4.3 (the machine is about 2 years old)
-                            ^^^
                              !-- Just checked, Rev 4.4
-Tommy Petersson
-
I'm interested in hering both about the hardware installation part,
eventual "Startup-Sequence calls of nifty utilities that enhance",
software incompabilities etc.

I have an A2620 with 2Meg on + a 2Meg 16-bit card in the machine.

Tommy P.