Path: utzoo!attcan!uunet!cs.utexas.edu!sun-barr!rutgers!orstcs!upas.CS.ORST.EDU!rudolpe
From: rudolpe@upas.CS.ORST.EDU (RUDOLPh ERIC)
Newsgroups: comp.sys.amiga.hardware
Subject: 14 mhz
Message-ID: <21053@orstcs.CS.ORST.EDU>
Date: 16 Oct 90 19:58:09 GMT
Sender: usenet@orstcs.CS.ORST.EDU
Reply-To: rudolpe@upas.CS.ORST.EDU (RUDOLPh ERIC)
Organization: Oregon State Univ. - CS - Corvallis, OR
Lines: 15

Here goes again:
I installed a 16mhz 68000p12F (F!) in the rev 5 amiga 500. For the 14mhz signal,
I tried CDAC* XOR 7mhz and (NOT) CDAC* XOR 7mhz with a 74Fast86.
The leads fron agnus to the 86 are about two inches long, solid wire.
The leads from the 86 to the 68k are about 2 inches long also, with ferrite bead.
Now when I turn on the computer, it ALWAYS comes up dark grey first, then 
bright green replaces it. I get 10 short flashes, and one long flash, and it
tries to restart.

I am under the impression that DTACK will hold off weird bus cycles. What is the
problem here, will somebody explain why this is going bad and how I might get 
it to work with some extra logic? In my opinion, this is a very very poor Hack.

Also, please include the number of your server. My server has a HARD time
identifying names. I.E. umbra.cs.orst.edu=128.???.???.??. Thanks.