Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!wuarchive!zaphod.mps.ohio-state.edu!samsung!umich!umeecs!msi.umn.edu!cs.umn.edu!dmshq!com50!rosevax!atc!s5000!nightowl!medtron!dt4100c
From: dt4100c@medtron.medtronic.com (Derek Terveer)
Newsgroups: comp.sys.apollo
Subject: Re: Problem with bash from an xterm on Apollo
Message-ID: <1990Oct11.200712.12821@medtron.medtronic.com>
Date: 11 Oct 90 20:07:12 GMT
Organization: Medtronic, Inc., 7000 Central Avenue NE, Fridely, MN, 55432 USA
Lines: 18

In article <1899@tuvie> mike@tuvie (Inst.f.Techn.Informatik) writes:
> In article <27375@usc.edu> sridhar@surya.usc.edu (M. A. Sridhar) writes:
> >
> >I run X11R3 on an Apollo DN3000 with Domin/IX 10.2, and I use xterm to log into
> >a DECstation on the local net. And I built GNU's bash to run on the DECstation.
> >The problem is that when I run bash, and execute say ls -FC under it, about half
> >the output does not show up!
> Seems like there are some problems with xterm. When usingan xterm and rlogin to
> a MicroVax II running Ultrix-32 V3.1 (Rev. 9) System #4, vi has problems 
> updating the screen if I insert lines. CTRL-L works OK, still I am once 
> again having doubts about Apollo software being compatible to _anything_. 

I experience the same problems with sr10.2 using xwindows and logging
into sun workstations (with bash).  What i don't quite understand is
why this happens with bash and not with ksh/sh/csh???
-- 
Derek "Tigger" Terveer
Just the facts, ma'am:		det@medtron.medtronic.com