Path: utzoo!attcan!uunet!mcsun!tuvie!mike From: mike@tuvie (Inst.f.Techn.Informatik) Newsgroups: comp.sys.apollo Subject: Re: Problem with bash from an xterm on Apollo Message-ID: <1919@tuvie> Date: 16 Oct 90 16:33:21 GMT References: <1990Oct11.200712.12821@medtron.medtronic.com> <1917@tuvie> Reply-To: mike@tuvie.UUCP (Inst.f.Techn.Informatik) Organization: Technical University of Vienna, AUSTRIA Lines: 17 In article matt@bacchus.esa.oz (Matt Atterbury) writes: > Describe the set-up completely. I haven't seen any articles in > which you explain exactly what it is. Im using a DN3010 (diskless), running sr10.2.0.5. I use an xtrem to do an rsh to a MicroVax II running Ultrix-32 V3.1 (Rev. 9) System #4. The systems are connected by an ethernet. When I'm using vi, it has problems inserting new lines. (CTRL-L will work, but is somewhat inconvenient.) bye, mike Michael K. Gschwind, Institute for VLSI-Design, Technical University, Vienna mike@vlsivie.at 1-2-3-4 kick the lawsuits out the door mike@vlsivie.uucp 5-6-7-8 innovate don't litigate e182202@awituw01.bitnet 9-A-B-C interfaces should be free Voice: (++43).1.58801 8144 D-E-F-O look and feel has got to go! Fax: (++43).1.569697