Path: utzoo!attcan!uunet!timbuk!cs.umn.edu!uc!noc.MR.NET!msi.umn.edu!umeecs!umich!caen!zaphod.mps.ohio-state.edu!nisca.ircc.ohio-state.edu!hpuxa.ircc.ohio-state.edu
From: curtiss@hpuxa.ircc.ohio-state.edu (Brent A. Curtiss)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Help! EMM on an IBM X/T clone motherboard.
Message-ID: <5732@nisca.ircc.ohio-state.edu>
Date: 16 Oct 90 12:45:56 GMT
Sender: news@nisca.ircc.ohio-state.edu
Distribution: na
Organization: The Ohio State University (IRCC)
Lines: 17
Originator: curtiss@hpuxa.ircc.ohio-state.edu

Could some hardware guru help me out with this one?

I have an X/T clone with a 12Mhz 8088 and 1 Meg on the
board.  Unfortunately, I can only use 640K of that memory.
I haven't been able to figure out how to configure the
rest of the memory as Expanded or Extended memory so 
that it can be used by Windows 3.0 (which runs fine on 
an X/T by the way.)

Would buying a "above-board" type card help in this case?

Any help would be greatly appreciated!

Brent Curtiss
INSTRUCTION AND RESEARCH COMPUTER CENTER 
The Ohio State University
CURTISS@HPUXA.IRCC.OHIO-STATE.EDU