Xref: utzoo comp.sys.mac.programmer:18349 comp.sys.mac.hardware:5900
Path: utzoo!attcan!uunet!wuarchive!udel!princeton!njin!uupsi!rodan.acs.syr.edu!isr
From: isr@rodan.acs.syr.edu (Michael S. Schechter - ISR group account)
Newsgroups: comp.sys.mac.programmer,comp.sys.mac.hardware
Subject: Coprocessor Platform interfacing
Message-ID: <1990Oct17.161808.13772@rodan.acs.syr.edu>
Date: 17 Oct 90 17:46:52 GMT
Sender: isr@rodan.acs.syr.edu (Michael S. Schechter - ISR group account)
Organization: Institute for Sensory Research
Lines: 20

Anyone else out there have the Coprocessor Platform?

I just got mine, and am wondering now Apple expects us to
interface to the 68000? By plugging into the RAM sockets?
By soldering itty-bitty wires on the ACT2441 leads? :) ??

Is there a mysterious Tech Note on the card that might give
some clue??  
Or has someone already pulled there hair out for a week and
a half tracing lines and figuring out a moderately-not-too-bad
way to connect to the 68000 ??

I suppose come of the lines on the resistor pack won't be
too hard to hack connections too, but why isn't there
a header on this card with signal lines?

Mike
--
Mike Schechter, Computer Engineer,Institute Sensory Research, Syracuse Univ.
InterNet: Mike_Schechter@isr.syr.edu isr@rodan.syr.edu Bitnet: SENSORY@SUNRISE