Xref: utzoo comp.text:7412 comp.sys.ibm.pc.misc:2588
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!ukc!educ-isis!teexnma
From: teexnma@ioe.lon.ac.uk (Nino Margetic)
Newsgroups: comp.text,comp.os.msdos.aps,comp.sys.ibm.pc.misc
Subject: Re: WordPerfect 5.1 Question
Summary: Use the PTR program
Message-ID: <1990Oct12.134336.3341@ioe.lon.ac.uk>
Date: 12 Oct 90 13:43:36 GMT
References: <1990Oct10.101610.25771@rivm.nl>
Reply-To: teexnma@ioe.lon.ac.uk (Nino Margetic)
Organization: Dept. of Medical Physics - University College London
Lines: 25

In article <1990Oct10.101610.25771@rivm.nl> ccefhh@rivm05.rivm.nl (Frits v.den Heuvel) writes:
>We have a pc wich is connected to an automatic dataswitch.
>The pc now has 2 possibilities to print out files, postscript and
>hplaserjet. The data switch needs a prefix to switch to either
>postscript- or laserjet printer. The prefix in my case is @SETUP5 or
>@SETUP6. Is there a clue for WP5.1 end users, to make their work a lot
>easier? I've read TFM on it, but there are still lots of actions you
>have to run through. Does anybody who's familiar with macro's have a
>good hint for it???      Thanks in advance....... Frits........

As I understand it, you have to modify the *.ptr programs, ie the
printer drivers. This can be done by using the PTR.EXE programs
supplied with the WP5.1. You will have to add your string (@SETUP5 or
@SETUP6) into the "Initialization String" section for each of the 
respective printer drivers. Once you modify the drivers, the only
thing you have to do is to re-select the appropriate driver before
using it.
Hope this helps.

--Nino
-- 
Janet: n.margetic@uk.ac.lon.ioe                    \   Nino Margetic         
Earn/Bitnet: n.margetic%ioe.lon.ac.uk@ukacrl.bitnet \  University College
Internet: n.margetic%ioe.lon.ac.uk@nsfnet-relay.ac.uk\ London, UK
Uucp: ...!mcvax!ukc!educ-isis!n.margetic              \(+44)(071)387-9300/x5313