Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!world!unixland!bill
From: bill@unixland.uucp (Bill Heiser)
Newsgroups: comp.unix.sysv386
Subject: Re: Re^2: 4 Port Serial Boards
Keywords: FAS,MU-440,DFI,Serial
Message-ID: <1990Oct15.005916.21858@unixland.uucp>
Date: 15 Oct 90 00:59:16 GMT
References: <1990Oct5.213445.6176@sdgsun.uucp> <27447@usc.edu> <1990Oct12.104519.2171@ctk1.UUCP>
Organization: The Think_Tank BBS & Public Access Unix
Lines: 19

In article <1990Oct12.104519.2171@ctk1.UUCP> chris@ctk1.UUCP (Chris Old) writes:
>engwall@mtha.usc.edu (Ralph Engwall) writes:
>
>>A short while back there was some talk here about a dumb 4 port
>>serial board called a MU-440 made by DFI.
>
[lots of other stuff deleted]

If one of these 4-port boards is installed in a 386, can the existing
two serial ports (on a generic i/o card) remain installed, giving a 
total of 6 ports (plus retaining the parallel port on that card)?



-- 
home:	...!{uunet,bloom-beacon,esegue}!world!unixland!bill
	bill@unixland.uucp
	bill%unixland.uucp@world.std.com
	Public Access Unix  - Esix SYSVR3 - (508) 655-3848