Path: utzoo!attcan!uunet!know!zaphod.mps.ohio-state.edu!swrinde!ucsd!ucbvax!ucbvax.berkeley.edu!thewalt From: thewalt@canuck.ce.berkeley.edu (C. Thewalt) Newsgroups: comp.unix.ultrix Subject: Re: Ultrix install question (no window mgr.) Message-ID: Date: 13 Oct 90 20:07:10 GMT References: <1990Oct12.151310.1@mel.cipl.uiowa.edu> Sender: usenet@ucbvax.BERKELEY.EDU Organization: Dept. of Civil Engineering, University of California, Berkeley Lines: 25 In-reply-to: fleagle@mel.cipl.uiowa.edu's message of 12 Oct 90 21:13:10 GMT In article <1990Oct12.151310.1@mel.cipl.uiowa.edu> fleagle@mel.cipl.uiowa.edu writes: We have just received a new DecStation 5000/200 px. This is our first Ultrix (or Unix for that matter) machine, so please be kind in your response. It doesn't help that our documentation has not yet arrived! (we do have the small installation book) We installed the distribution tape using the advanced installation. We selected almost all the options (no system execiser or enhanced security) and everything proceeded with no apparent problems until the very end when we get a login prompt. The manual says we should see the login prompt screen (I assume the one with the big DIGITAL logo on it) but we just get a non window prompt. When we login everything seems to be there, except we don't know how to get the window manager running. Any advice will be appreciated. For the 200PX the server won't work unless ou install the mandatory upgrade tape and rebuild the kernel. There should be a little booklet describing this process. Chris -- Christopher Robin Thewalt These opinions are not necessarily thewalt@ce.berkeley.edu shared by my employer... University of California, Berkeley