Xref: utzoo comp.unix.sysv386:1327 comp.unix.xenix.sco:522 comp.sys.ibm.pc.hardware:2326
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!samsung!munnari.oz.au!csc.anu.oz.au!csc3.anu.oz.au!ccadfa!bxw
From: bxw@ccadfa.adfa.oz.au (Brad Willcott)
Newsgroups: comp.unix.sysv386,comp.unix.xenix.sco,comp.sys.ibm.pc.hardware
Subject: Re: WD8013 & SCO UNIX
Message-ID: <1965@ccadfa.adfa.oz.au>
Date: 18 Oct 90 00:54:37 GMT
References: <65191@iuvax.cs.indiana.edu>
Organization: Computer Centre, University College, UNSW, ADFA, Canberra, Australia
Lines: 24

mikes@iuvax.cs.indiana.edu (Michael Squires) writes:

>I've just discovered that the WD8013 in my SCO UNIX (ODT 1.0, actually)
>works well - when I don't use the graphics features of my VGA plasma
>display.  Running an X display causes all non-X displays to vanish,
>although the keyboard works (at least long enough to shut down the system).

>It looks like the WD & the VGA board are conflicing, as SCO says they may
>do in the release notes.  I've not tried changing parameters (yet); I was
>using INT 2, IO 280, 16K RAM at D0000.

If possible, switch your VGA board to "8 bit" mode, and try using:
	INT 5, I/O 2a0 & address DC000.

>On the other hand, I used a WD8003EBT with an 8-bit Paradise clone under
>XENIX 2.3.2 for quite a while (although never with X11).

[...]

-- 
Brad Willcott,                          ACSnet:     bxw@ccadfa.cc.adfa.oz
Computing Services,                     Internet:   bxw@ccadfa.cc.adfa.oz.au
Australian Defence Force Academy,       UUCP:!uunet!munnari.oz.au!ccadfa.oz!bxw
Northcott Dr. Campbell ACT Australia 2600  +61 6 268 8584  +61 6 268 8150 (Fax)